Designing a Mandocello

One of my summer projects is to finalize the design for the Mandocello I plan to build this fall. I'm certainly not an instrument designer but I am trying to come up with a design that is both aesthetically pleasing and playable. I also have a certain skill level in building that I want to match.. So for now those requirements rule out a caved arch of the A or F style classic Gibson's.

Mandocellos are a bit of an enigma as far as instruments go, although some would say they are enjoying a comeback after years in obscurity they are still what I guess you fringe instrument. Most people have still never heard of one let alone thought of playing one. Designs of modern Mandocellos are all over the map. Ranging from those that closely resemble the classic Gibson'
s to guitar body shapes and beyond.

Historic Gibson K1

Also the tuning of what some people are calling Mandocellos varies some tuned more like an Irish Bouzouki and a Mandocello. I think of a Mandoceloo as still the Cello part of a Mandolin orchestra so still CGDA Exactly the same a bowed Cello.

So my plan is to build a Mandocello that is tuned to the standard tuning CGDA and use a guitar shape with an induced arch top and back. Now there are a lot of other parameters to consider, things like scale length, body size, depth and arch.

One of the big decisions with a Mandocello, at least for me is scale length, A bowed Cello is about a 27" scale length but for me anyway that is too long to play comfortably. The problem is the shorter you go with scale length the harder it is to the the low C string to have enough tension.. A good scale length for my hand size would be 24.25" but that is getting really short for a Mandocello. I will most likely use a 24.75" scale length which is the same as the old Gibson A style Mandocellos.

A modern Ovation Mandocello

You also need to consider the body size, and although I am using an Gibson A style scale length I think the A style body does not have quite enough internal volume for the lower register.. So I am going to use a Gibson L-0 bidy shape.

Next the stress on the body, since I am not using a carved body plates I need to account to the increased string tension of a Mandocello over what a 6 string guitar's String tension would be. The tension on a Mandocello is almost double a 6 string guitar.. I will be reworking the bracing pattern to mimic what would be a 12 string guitar X brace design.. perhaps with carbon fibre  Over the summer I'll be finalizing that design as well.

Gibson L-0 6 String Guitar

Also the neck has to withstand these forces as well so I am planning a Narra neck with a double acting truss rod and I am debating carbon fibre reinforcement.

Lastly aesthetics  Mostly because the last few instruments I've built have been darker tone I'll be going a bit lighter looking for this one.. I'm planning a Oregon Myrtle Back & Sides with a Sitka Spruce top (Sitka will help in withstanding the string tension) The trim on the instrument is planned for Indian Rosewood, I'm still deciding how I am going to do the rosette but it will be some form of segmented wood rosette I think.

So there is the process thus far.. Of course you can follow this Mandocello as I build it.